Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Take out the oil tank of hydraulic
oil from the package
4. Connect the draw pole with the oil
tank
7. Connect the trailing end with the
trunk with the bolt
01
2. Assemble the bearing on each one
wheel
04
5. Connect the draw pole with the oil
tank via bolt and nut
07
8. One person pulls out the bolt (on
the drawbar, with spring inside)
and presses the draw pole hard; the
other person put the main body
down slowly
17
02
3. Fix the wheel with bearing on the
axle of oil tank and fasten the nut
with the wrench
05
6. Stand up the main body
08
9. Put the bolt back at right position,
now the main body is fixed on the
draw pole
03
06
09
Publicidad
Tabla de contenido
