Safety Instructions - Parkside PBSL 5000 B1 Instrucciones De Utilización Y De Seguridad

Safety instructions

BEFORE USING THE PRODUCT, FAMILIARISE
YOURSELF WITH ALL OF THE SAFETY
INFORMATION AND INSTRUCTIONS FOR
USE! WHEN PASSING THIS PRODUCT
ON TO OTHERS, ALSO INCLUDE ALL THE
DOCUMENTS!
WARNING!
LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
Never leave children unsupervised with the
packaging material . Always keep children away
from the packaging material .
This product may be used by children aged
8 years and up, as well as by persons
with reduced physical, sensory or mental
capacities, or those lacking experience and /
or knowledge provided they are supervised
or instructed in the safe use of the product
and they understand the associated risks . Do
not allow children to play with the product .
Cleaning and user maintenance must not be
performed by children without supervision .
This product is not a toy and should be kept
out of the reach of children . Children are
not aware of the dangers associated with
handling electrical products .
DANGER TO
Do not use the product if you detect any type
of damage .
Never immerse the product in water or other
liquids!
Only connect the product to a properly
installed USB socket . The voltage must
comply with information given in the section
"Technical data" .
Do not carry out any modifications or repairs
to the product yourself . The LEDs cannot and
must not be replaced .
The LEDs are not replaceable .
If the LEDs fail at the end of their lives, the
entire product must be replaced .
m
CAUTION! DANGER OF BURN
INJURIES! To prevent burns, verify the
product is switched off and has cooled down
for at least 15 minutes before touching it . The
product can become very hot .
The accessible surface, especially heat shrink,
is very hot when the lamp is operating .
FIRE HAZARD! Fit the product so that
it is at least 0 .1 metre away from the
material to be illuminated . Excessive heat
can result in a fire .
WARNING!
light when the product is facing down to a
combustible surface . The exposed surface
may be overheated or ignited .
Do not turn on the
GB/IE 17