Publicidad
Idiomas disponibles
Idiomas disponibles
Assembling the Grill
Step 1
1. Loosen the eight pre-installed screws on the front left leg (1), back left leg (2), front right leg (4), and back right leg (5).
2. Slide the keyhole slots in the bottom left frame support (3) onto the screws in the front left leg (1) and back left leg (2),
then retighten the four screws.
3. Slide the keyhole slots in the bottom right frame support (6) onto the screws in the front right leg (4) and back right leg (5),
then retighten the four screws.
Step 2
1. Loosen the four pre-installed screws on the left leg assembly and right leg assembly.
2. Connect the left leg assemby to the right leg assembly by sliding the keyhole slots in the back frame support (7) onto the
screws you loosened. Make sure the screw holes along the edge of the back frame support are facing upward, then tighten
the four screws.
PR-KMY0YMPZVX_B0B8QV3MS2_4 burner Gas Grill_Assembly Man_V1_BK1.indb 7
PR-KMY0YMPZVX_B0B8QV3MS2_4 burner Gas Grill_Assembly Man_V1_BK1.indb 7
EN
7
10/7/2022 12:16:44 PM
10/7/2022 12:16:44 PM
Publicidad
