Charging The Battery - Würth ERGOPOWER COMPACT 5+2W LED Traducción De Las Instrucciones De Uso Originales

GB
Operation
1
1
2
3
Light output – Spot light and main light
Handle - bendable
Magnet
Hook extandable
USB connection – power supply and USB-cable
for charging the lamp included in the delivery
Battery charge status (indicator light). When
switching the lamp on, the battery charge status
is displayed for approx. 5 seconds
On/Off switch –
step: Spot light
step: Main light -
step: Main light -
Hand strap
8

Charging the battery

• Before taking the hand lamp into service for the first
4
• Fully charge the hand lamp before it is stored for a
3
5
• Switch lamp off during charging.
6
• Remove the protective cap from the connector (5)
7
• Connect the power supply to the mains socket
3
8
• During charging, the indicator light (6)
• If charging is completed, the indicator lights (6) light
• Do not charge the battery longer than required
• Disconnect the charger and attach the protective cap
Notes regarding operation
The switched-on lamp is very bright and the lamp
may get hot in the vicinity of the light outlet. When
the lamp is switched on:
• do not look directly into the light outlet.
• ensure that nobody is exposed to glare.
• do not cover the light outlet.
• do not put down the lamp with the light outlet
time charge it for 6-8 hours
longer period.
and connect the cable or charger.
(100-240 V～).
flashes according to the charging status.
up continuously.
to prevent overheating.
for connector (5).
pointing downwards.