• Press the on/off button (4) to switch on
the light and to set the brightness:
— 1× click = light on 25%
— 2× clicks = light on 50%
— 3× clicks = light on 75%
— 4× clicks = light on 100%
— 5× clicks = light off
• Set the on/off switch (8) to position 0 to
switch off the light completely
Folding the light:
5.3
• Set the on/off switch (8) to position O
• Press the release button (3) and fold
down the light (1)
• Fold the tripod's 3 legs together
• Store the cord in the cord holder (5)
6. Cleaning, maintenance and
storage
Cleaning
6.1
Clean the machine regularly with a damp
cloth and a little mild soap. Do not use
cleaning agents or solvents; these may
damage the plastic parts of the machine.
Make sure that no water can get into the
inside of the machine.
Maintenance
6.2
There are no serviceable parts inside the
machine.
Storage
6.3
Store the unit and accessories in a dark, dry
and frost-free place.
7. Technical data
AC mode
Input voltage . . . . . . . . . . .230 V~ 50Hz
Work light . . . . . . . . . . . . . . . 45 W LED
Lumen. . . . . . . . . . . . . . . . . .4300 lm
DC mode
Input voltage . . . . . . . . . . . . . . 18 V
Work light . . . . . . . . . . . . . . . 25 W LED
Lumen. . . . . . . . . . Max 2700 lm (100%)
Working time on a full 4Ah battery . . 2.5 hours
IP class . . . . . . . . . . . . . . . . . . . IP54
Measurements. . . . . . 15 × 23.1 × 18.2 cm
Weight: . . . . . . . . . . . . . . . . . . 3.5 kg
8. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
This packaging is a raw material and as such
can either be reused or can be fed back into
the raw material cycle. The electric power
tool and its accessories are made from
various materials such as metals and
plastics. Take defective components to a
special refuse collection point. Ask about
these at your specialist shop or local council.
Batteries
8.1
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is. Do not
dispose of batteries with domestic refuse. Do
not dispose of by burning, risk of explosion.
9. EC-Declaration of conformity
We, the Batavia B.V., Weth.
Wassebaliestraat 6d, NL-7951 SN
Staphorst, declare by our own responsibility
that the product LED Work light,
Item-No 7064211, Model Nr. BT–CWL002
is according to the basic requirements,
which are defined in the European
Directives Electromagnetic Compatibility
2014/30/EU (EMC), RoHS: 2011/65/EU,
2014/35/EU (LVD) and their amendments.
For the evaluation of conformity, the
following harmonized standards were
consulted:
EN 60598-1:2015+A1:2018;
EN 60598-2-4:2018;
EN IEC 62031:2020;
EN 62471:2008;
EN 62493:2015;
EN 61547:2009;
EN IEC 55015:2019+A11:2020;
EN IEC 61000-3-2:2019+A1:2021;
EN 61000-3-3:2013+A1:2019;
AfPS GS 2014:01 PAK
English
5