What Is Included; Dmx Linking; Dmx Connection; Master/Slave Connection - Chauvet Professional OVATION E-910FC IP Guía De Referencia Rápida

Ocultar thumbs Ver también para OVATION E-910FC IP:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

What is Included

Ovation E-910FC IP
Seetronic Powerkon IP65 power cord
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
It is possible to link up to 5 Ovation E-910FC IP products at 100 VAC, 6 products at 120 V, 11 products at 208 V, or 12
products at 230 or 240 VAC. Never exceed this number. Power linking cords can be purchased separately.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect
the product from power via breaker or by unplugging it.
When using this product in an outdoor IP65-type environment, be sure to use IP65 (or higher) rated power
cables and secure unused ports with attached IP65 covers.

DMX Linking

The Ovation E-910FC IP will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available
from www.chauvetprofessional.com.

DMX Connection

The Ovation E-910FC IP uses a 5-pin DMX data connection for its DMX personalities: 1Ch, 4Ch, 6Ch, 8Ch, 11Ch, 13Ch,
14Ch, 17Ch, and HSV. See the User Manual for information about connecting and configuring the product for DMX
operation.
When using this product in an outdoor IP65-type environment, be sure to use IP65-rated (or higher)
data cables and secure unused ports with attached IP65 covers.

Master/Slave Connection

The Ovation E-910FC IP uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The Ovation E-910FC IP supports RDM protocol that allows feedback to make changes to menu
map options. Download the User Manual from
Ovation E-910FC IP QRG Rev. 11
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
Soft focus filter
Quick Reference Guide
Wire (Europe)
Brown
Blue
Green/Yellow
for more details.
EN
Screw Color
Yellow/Brass
Silver
Green
2

Publicidad

Tabla de contenido
loading

Tabla de contenido