Quick Installation Guide V1.0 -2022 -11-09
01
Safety Precautions
General Disclaimer
•
The information in this quick installation guide is subject to change due to product
updates or other reasons. All descriptions here are for guidance only.
•
Before installations, read through the quick installation guide.
•
All operations should be performed by trained and knowledgeable technicians who are
familiar with local standards and safety regulations.
•
Check the deliverables for correct model, complete contents, and intact appearance.
Contact the manufacturer if any damage is found or any component is missing.
•
Strictly follow the installation, operation, and configuration instructions in this guide .
The manufacturer shall not be liable for equipment damage or personal injury if you do
not follow the instructions. For more warranty details, please visit
com/warranty.
Safety Disclaimer
WARINING
•
Make sure that the device is powered off before any operations.
•
Ensure the cables are connected tightly, securely, and correctly. Inappropriate wiring may
cause poor contact or damage the device.
•
Additional circuit breakers are recommended on the voltage input side to avoid personal
injury or device damage.
•
Specification of the protective fuse should be 0.5A.
•
In areas at risk of lightning, if the device cable exceeds 10m and wired without grounded
metal conduits, you are recommended to use an external lightning protection device.
Check before Power-on
No.
The product is firmly installed at a clean place that is well-ventilated and easy-
1
to-operate.
The input power cables, CT Cables, and communication cables are connected
2
correctly and securely.
3
Cable ties are intact, routed properly and evenly.
Check Item
1
EN
https://en.goodwe.