Goodwe GM3000C Guía De Instalación Rápida página 76

Set the CT parameters using ProMate (system comprised of multiple inverters)
Before setting the parameters, make sure that:
1. Both EzloggerPro and GM3000C is powered on.
2. GM3000C is correctly connected to COM4 of EzloggerPro via RS485.
3. The Ezlogger Pro Promate software has been downloaded from GOODWE's official
website and installed on the computer.
4. ProMate is connected to EzLogger Pro successfully. For detailed procedures, refer to
the EzLogger Pro Series User Manual.
Descriptions of the Export Function.
1
• Total Capacity: Set according to the total capacity of the PV station.
• Power Limit: Set according to the target power that needs to be fed into the grid.
• Ratio of CT: Set according to the CT transformation ratio.
NOTICE
2
Quick Installation Guide V1.0 -2022 -11-09
74