belavi 22636-22 Manual Del Usuario página 6

STEP 4:
Insert the left-side of frame of Chair Back (C) into peg found on the
back of Armrest (B).
10
Assembly Instructions
B
2X
3
2
Fig. 3
STEP 5:
Insert two M6x35 Bolts (1) with washers through eyelets of seat frame,
and into the horizontal bar of Armrest (B).
Insert one M6x25 Bolt (2) with washer through eyelet on front panel of
Chair Seat (D), and into the side of the front leg of Armrest (B).
Insert one M6x25 Bolt (2) with washer through eyelet on the bottom of
frame of Chair Back (C), and into the side of the back leg of Armrest (B),
see Fig. 3. Tighten all bolts left loose during assembly process using
Hex Key (3).
Assembly Instructions
1
2
2X
11