Beper C206UTI005 Manual De Instrucciones página 6

Universal Washer and Dryer Stacking Kit Use Instructions
Specific warnings
Do not use the product for purposes other than those indicated.
Do not hang on the pull-out tray or place weights over 15 kg on it.
Maximum main structure capacity: 200 kg.
Compatible with front loading dryers with a maximum width of 60 cm and a depth between 45-60 cm.
Always place the dryer on top of the stacking kit, never the washing machine.
Product description Fig.A (a)
1. Handle
2. Handle fixing screws
3. x8 non-slip stickers
4. Safety strap
5. Main structure
Assembly Fig.A
Attach the handle to the pull-out tray using the supplied screws (b).
Glue the anti-slip stickers above and below the main structure (c, c1).
Place the main structure on top of the washing machine so that the handle is curved upwards (d).
Place the dryer on top of the main structure (e).
Note: If the feet of the dryer do not lay properly on the metal frame of the product, remove the
feet (e).
To lock the tray, pull towards you as far as it will go.
Lift the tray slightly by the handle, position the folds of the guide in correspondence with the structure
wheel (f).
To remove the tray from the locked position, lift slightly and pull towards you.
Note: Do not remove the tray with loads lay on it.
To remove the tray, pull it out and push it first upwards and then downwards (f).
Safe positioning Fig.B
Place the strap around the column so that it passes over and under appliances. To attach the safety
strap, open the buckle and insert the strap (g).
Always position the dryer and washing machine so that they are aligned and stable (h).
Tighten the belt well to make sure the column is stable and periodically check that the belt is not slack.
Always place the dryer on top of the stacking kit, never the washing machine and do not hang on the
removable tray or place weights over 15 kg on it.
With a view to continuous improvement, Beper reserves the right to make changes and impro-
vements to the product in question without prior notice.
6