Loewe 52 SL Instrucciones De Servicio página 19

Service Loewe Reference 52 - TV
FOR THE WORKSHOP
Service Loewe Reference 52 - TV
FOR THE WORKSHOP
Service Loewe Reference 52 - TV
1. Disassembly of the signal board via the service cover
2. Removal of the contrast filter panel
Service Loewe Reference 52 - TV
1. Disassembly of the signal board via the service cover
3. Removal of the back panel
2. Removal of the contrast filter panel
4. Disassembly of the basic board
1. Disassembly of the signal board via the service cover
3. Removal of the back panel
5. Disassembly of the controller board
2. Removal of the contrast filter panel
4. Disassembly of the basic board
1. Disassembly of the signal board via the service cover
3. Removal of the back panel
5. Disassembly of the controller board
2. Removal of the contrast filter panel
4. Disassembly of the basic board
3. Removal of the back panel
5. Disassembly of the controller board
Warning!
4. Disassembly of the basic board
Avoid damage from electrostatic charging.
5. Disassembly of the controller board
Warning!
Handle MOS components properly.
Avoid damage from electrostatic charging.
Warning!
Handle MOS components properly.
Important:
Avoid damage from electrostatic charging.
Warning!
Handle MOS components properly.
Important:
Ensure that your working environment is clean and free of dust when working with the
Avoid damage from electrostatic charging.
Reference 52.
Handle MOS components properly.
Important:
Ensure that your working environment is clean and free of dust when working with the
Reference 52.
Be extremely gentle with the surfaces of the individual components and wear the gloves
Important:
Ensure that your working environment is clean and free of dust when working with the
provided by Loewe premium service when working on Reference products in order to
Reference 52.
Be extremely gentle with the surfaces of the individual components and wear the gloves
avoid scratches or other damage to the surfaces.
Ensure that your working environment is clean and free of dust when working with the
provided by Loewe premium service when working on Reference products in order to
Reference 52.
Be extremely gentle with the surfaces of the individual components and wear the gloves
avoid scratches or other damage to the surfaces.
provided by Loewe premium service when working on Reference products in order to
Be extremely gentle with the surfaces of the individual components and wear the gloves
To facilitate servicing in some set-up situations, we recommend using the Service Stand
avoid scratches or other damage to the surfaces.
provided by Loewe premium service when working on Reference products in order to
Reference 52, available from the Loewe spare parts service with the article number 484-
To facilitate servicing in some set-up situations, we recommend using the Service Stand
avoid scratches or other damage to the surfaces.
90446.990.
Reference 52, available from the Loewe spare parts service with the article number 484-
To facilitate servicing in some set-up situations, we recommend using the Service Stand
90446.990.
The help of a second person is essential for some stages of the work.
Reference 52, available from the Loewe spare parts service with the article number 484-
To facilitate servicing in some set-up situations, we recommend using the Service Stand
90446.990.
The help of a second person is essential for some stages of the work.
Reference 52, available from the Loewe spare parts service with the article number 484-
1. Disassembly of the signal board via the service cover
90446.990.
The help of a second person is essential for some stages of the work.
1. Disassembly of the signal board via the service cover
1.1 Removal of the service cover The help of a second person is essential for some stages of the work.
1. Disassembly of the signal board via the service cover
1.1 Removal of the service cover
Remove the cover over the cable duct.
1. Disassembly of the signal board via the service cover
1.1 Removal of the service cover
Remove the cover over the cable duct.
Remove the 4 Torx screws (two size T10 (white arrows) and two size T20 (green arrows) to
loosen the service cover (fig. 1).
1.1 Removal of the service cover
Remove the cover over the cable duct.
Remove the 4 Torx screws (two size T10 (white arrows) and two size T20 (green arrows) to
loosen the service cover (fig. 1).
The cover can then be pulled off with an upwards motion (fig. 2).
Remove the cover over the cable duct.
Remove the 4 Torx screws (two size T10 (white arrows) and two size T20 (green arrows) to
loosen the service cover (fig. 1).
The cover can then be pulled off with an upwards motion (fig. 2).
If the set is situated on the original support column, make sure that no damage is caused to the
Remove the 4 Torx screws (two size T10 (white arrows) and two size T20 (green arrows) to
existing design elements at each stage of the work.
loosen the service cover (fig. 1).
The cover can then be pulled off with an upwards motion (fig. 2).
If the set is situated on the original support column, make sure that no damage is caused to the
existing design elements at each stage of the work. TECHNICAL CUSTOMER SERVICE
It is recommended to cover the floor plate with a fleece or similar material.
The cover can then be pulled off with an upwards motion (fig. 2).
If the set is situated on the original support column, make sure that no damage is caused to the
existing design elements at each stage of the work.
It is recommended to cover the floor plate with a fleece or similar material.
If the set is situated on the original support column, make sure that no damage is caused to the
existing design elements at each stage of the work.
It is recommended to cover the floor plate with a fleece or similar material.
It is recommended to cover the floor plate with a fleece or similar material.
Fig. 1
1.2 Removal of the CI module and AVS socket board
Fig. 2
19
15.10.2009
15.10.2009
15.10.2009
15.10.2009
Loewe Opta GmbH
96317 Kronach, Industriestr. 11
96305 Kronach, Postfach 15 54
Loewe Opta GmbH
Telefon (0 92 61) 99-0
96317 Kronach, Industriestr. 11
Telefax (0 92 61) 99-730
96305 Kronach, Postfach 15 54
e-mail: loewe@loewe.de
Loewe Opta GmbH
Telefon (0 92 61) 99-0
www.loewe.de
96317 Kronach, Industriestr. 11
Telefax (0 92 61) 99-730
96305 Kronach, Postfach 15 54
e-mail: loewe@loewe.de
Loewe Opta GmbH
Telefon (0 92 61) 99-0
www.loewe.de
96317 Kronach, Industriestr. 11
Telefax (0 92 61) 99-730
96305 Kronach, Postfach 15 54
e-mail: loewe@loewe.de
Telefon (0 92 61) 99-0
www.loewe.de
Telefax (0 92 61) 99-730
e-mail: loewe@loewe.de
www.loewe.de