Loewe 52 SL Instrucciones De Servicio página 22

TECHNICAL CUSTOMER SERVICE
Unfasten the connections which lead from other modules to the signal board (see fig. 8).
To unfasten the LAN socket, tip the signal board with support carefully out of the set and
remove both the T10 Torx screws (see fig. 8).
Then, remove the LVDS connection on the underside of the signal board and lift the board
carefully out of the set (see fig. 9).
Fig. 8
1.5 Removing the signal board from the support
Then, after unscrewing 8 T10 Torx screws, 4 bolts for the VGA and RS-232 socket and 2 nuts
on the SAT front ends, it is possible to remove the signal board from the support.
To install, follow the instructions above in reverse.
Fig. 10
Fig. 9
22
Loewe Opta GmbH
96317 Kronach, Industriestr. 11
96305 Kronach, Postfach 15 54
Telefon (0 92 61) 99-0
Telefax (0 92 61) 99-730
e-mail: loewe@loewe.de
www.loewe.de