Klarstein PASSAU Manual De Instrucciones página 25

8. Insert the beer outlet connector at the end of the beer line of the tap into the
centre of the metal connection opening of the beer valve device and turn it
clockwise to fix it (see figure 6).
9. Cover the top cover (see the inscription on the top cover for more
information). Set the power switch to the "-" position. The unit will then start
operating (set the power switch to the "o" position to cut off the power supply
to the unit) (see figure 7). CAUTION: Make sure your hands are dry before
pressing the power switch.
6
Beer outlet connector
Connection valve
7
Power plug
In this illustration, the mains switch is
deactivated in position "o".
EN
25