universalblue UBCO2100-20 Manual De Instrucciones página 36

Note: If you need to change your door to the opposite side it is
recommended that you call your local authorised service agent to
make this change or ask a technician.
Tools you will need to change the door:
8mm socket wrench
Thin-blade screwdriver
Parts you will need:
Left upper
cover
Note: before starting, hold the refrigerator on the back of the
refrigerator to have better access to the base. You should add
something soft on the back to avoid damage. To change the door,
follow the steps below:
1. Put the freezer in an upright position. Remove all baskets from
the door (to prevent damage) and then close the door.
2. Remove the top right hinge cover and the plug from the top
hinge hole.
hinge
Door stop left side
Cross-shaped screwdriver
8mm wrench
Door stopper left
ref
36