Marmitek Audio Anywhere 630 Manual De Instrucciones página 3

Installation
We recommend that you switch off your equipment before
•
connecting cables in order to prevent any of the devices
being damaged.
Record players need special phono pre-amplification to
•
make vinyl records sound right. Many turntables have this
built in, some do not. This product does not have a built-in
phono preamp.
1. Connect the Audio Source to the input[1] on the Audio
Anywhere 630 transmitter using the RCA audio cable.
2. Connect the Audio Destination* to the audio output [2] on the
Audio Anywhere 630 Receiver using the RCA audio cable.
3. Connect the power adapters [3] with the USB C cable to the
Transmitter and Receiver and plug the power adapters into
the electrical socket.
4. The Transmitter and Receiver will automatically turn on and
the white LED will flash slowly. On connection the LED light
will be steady.
5. The audio connection is ready to use.
3