Marmitek Audio Anywhere 630 Manual De Instrucciones página 4

Pairing
When you want to pair an extra receiver, push the power button
2 times quickly on the transmitter. The LED light will flash
quickly. Do the same on the new receiver. After a few seconds
the LED light will light up steady and the new receiver is
operational.
Standby
When there is no audio input for more than 30 minutes, the
Audio Anywhere 630 set will go in standby and the LED light will
turn off. When audio input is detected again, the set will wake up
in a few seconds and the wireless audio connection will work
again.
Power off
Long press the power button to turn off the transmitter and or
receiver.
Frequently asked questions (FAQs)
Please go to www.marmitek.com if you have any questions.
4