How To Clean And Store - Proctor Silex 74312 Manual De Instrucciones

How to Assemble and Use
1. If Blades are separated,
pick up by Plastic
Guard. Slide rivet on
one Blade into keyhole
slot in other Blade
until they are locked
together.
2. Holding Blades together
at base of Blade with
cutting edge down, slide
onto motor housing
until both Blades click
into place.
3. Plug into outlet.
4. Hold Knife by Handle. Pull ON/OFF Switch like a trigger to
operate. You must hold ON Switch for Knife to operate.
5. To stop, release ON Switch.

How To Clean and Store

WARNING
disconnect cord from electric outlet before inserting,
removing or cleaning blades. Blades are sharp; handle
carefully.
1. Unplug.
2. Firmly pull back Blade Release Switch. Grasp Plastic
Guard, with hand away from cutting edge, and carefully
pull until Blades release.
To reduce risk of personal injury, always
(cont.)
Click
5
Click