Promaker PRO-TIP20KIT Manual Del Usuario página 10

- if a Warranty Certifi cate or a Warranty Card
does not correspond to this electric machine or to
the form established by the supplier;
- upon expiration of the warranty period;
- at attempts of opening or repair of the electric
machine outside the warranty workshop; making
constructive changes and lubrication of the tool
during the warranty period, as evidenced, for
example, by the creases on the spline parts of
the fasteners of non-rotational parts.
- when using electric tools for production or other
purposes connected with making a profit, as well
as in case of malfunctions related to instability
of the power network parameters exceeding the
norms established by GOST;
- in the events of improper operation (use the
electric machine for other than intended pur-
poses, attachments to the electric machine of
attachments, accessories, etc. not provided by
the manufacturer);
- with mechanical damage to the case, pow-
er cord and in case of damages caused by
aggressive agents and high and low tempera-
tures, ingress of foreign objects in the ventilation
grids of the electric machine, as well as in case
of damage resulting from improper storage
(corrosion of metal parts);
- natural wear and tear on the parts of the electric
machine, as a result of long-term operation
(determined on the basis of the signs of full or
partial depletion of the specified mean life, great
contamination, presence of rust outside and
inside the electric machine, waste lubricant in the
gearbox);
- use of the tool the purposes for other than
specifi ed in the operating instructions.
- mechanical damages to the tool;
- in the event of damages due to non-obser-
vance of the operating conditions specified in the
instruction (see chapter "Safety Precautions" of
the Manual).
- damage to the product due to non-observance
of the rules of storage and transportation.
Preventive maintenance of electric machines
(cleaning, washing, lubrication, replacement
of anthers, piston and sealing rings) during the
warranty period is a paid service.
The service life of the product is determined by
the manufacturer and is 2 years from the date of
manufacture.
The owner is notified of any possible violations
of the above terms of wa rranty service upon
completion of diagnostics in the service center.
in his absence.
Do not operate the electric machine when
there are signs of excessive heat, sparking, or
noise in the gearbox. To determine the cause
of the malfunction, the buyer should contact the
warranty service center.
Malfunctions caused by late replacement of
carbon brushes of the engine are eliminated at
the expense of the buyer.
4. The warranty does not cover:
- replacement accessories (accessories and
components), for example: batteries, discs,
blades, drill bits, borers, chucks, chains,
sprockets, collet clamps, guide rails, tension and
fastening elements, trimming device heads, base
of grinding and belt sander machines, hexagonal
heads, etc.,
- fast wearing parts, for example: carbon
brushes, drive belts, seals, protective covers,
guiding rollers, guides, rubber seals, bearings,
toothed belts and wheels, shanks, brake belts,
starter ratchets and ropes, piston rings, etc. Their
replacement during the warranty period is a paid
service;
- power cords, in case of damage to the
insulation, power cords are subject to mandatory
replacement without the consent of the owner
(paid service);
- tool case.
Dear customer!
Thank you for purchasing the PROMAKER
and we hope that you will be satisfied with your
choice.
In the process
PROMAKER tools
®
control, if nevertheless your product will need
maintenance, please contact the authorized
PROMAKER service centers.
®
Attention!
When buying, ask a seller to check the
completeness and operability of the tool.
Through the PX2 guarantee, PROMAKER
guarantees the absence of production defects.
In the event that any of the above defects
are detected during the warranty period,
PROMAKER authorized service centers will
®
repair the product and replace the defective
spare parts free of charge.
The warranty period for PROMAKER
machines is 24 months from the date of sale.
®
of manufacturing
pass multilevel quality
electric
®
tool,
the
®
10