Snow Joe SUNJOE 24V-X2-21LMSP-CT Manual Del Operador página 11

Rodadora de césped inalámbrica - solo herramienta v máx | 53.3 cm
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Ejector flap
Fig. 7
Grass collection bag
Support rod (on both sides)
3. Release the ejector flap so that it rests on the grass bag.
(Fig. 8).
Fig. 8
Ejector flap
Grass
collection bag
Side Discharge Chute Assembly + Fitting
Use the side discharge chute on your mower when the grass is
too tall to mulch or when side discharging is preferred.
The grass clippings produced by the side discharge chute are
noticeably larger than those produced by the mulching plug.
NOTE: When using the side discharge chute, do not assemble
the grass collection bag. Insert the mulching plug in the rear
discharge opening.
1. Lift up the side discharge door.
2. Align the grooves on the side discharge chute with the
pins on the underside of the door, and hook the grooves
on the pins (Fig. 9).
All manuals and user guides at all-guides.com
Hook (on both sides)
Fig. 9
Side discharge
chute
Side discharge door
Grooves
3. Release the side discharge door.
Mulching Plug Assembly + Fitting
Your mower is equipped with a mulching plug to allow the
blade to cut and recut the grass for finer clippings.
NOTE: When using the mulching plug, do not assemble the
grass collection bag or the side discharge chute.
NOTE: When the grass collection bag is not attached, the
mulching plug must be inserted in the rear discharge opening.
1. Lift up the ejector flap.
2. Insert the mulching plug fully into the rear discharge
opening and make sure it's seated securely (Fig. 10).
Fig. 10
3. Release the ejector flap.
11
Pins
Ejector flap
Mulching plug
Rear
discharge
opening

Publicidad

Tabla de contenido
loading

Tabla de contenido