Samsung NX60 67 S Serie Manual Del Usuario página 103

Others
Problem
The product is not The appliance has been
level. installed improperly.
The leveling leg(s) is (are)
damaged or uneven.
The kitchen cabinets are
not properly aligned and
make the range appear to
be not level.
The display goes The electrical outlet
blank. Ground Fault Interrupter
(GFI or GFCI) has been
tripped and needs to be
reset.
Your digital control has
been damaged.
NX60A6715SS_AP_DG68-01376A-00_MES+EN.indb 49 NX60A6715SS_AP_DG68-01376A-00_MES+EN.indb 49
Cause Action
Make sure the floor is level,
strong, and stable. If the floor
sags or slopes, contact a
carpenter.
Check and level the range. (See
the Installation Instructions.)
Ensure that cabinets are
square and provide sufficient
room for installation.
Replace the fuse or reset the
circuit breaker.
Problem Cause
Food does not The wrong cooking mode
bake or roast was selected.
properly in the
The oven racks have not
oven.
been positioned properly
for the foods being
cooked.
Incorrect cookware or
cookware of improper
size is being used.
The oven temperature
needs to be adjusted and
recalibrated.
There is aluminum foil
on racks and/or oven
bottom.
The clock or timers are
not set correctly.
Food does not The oven controls are not
broil properly in set properly.
the oven.
The oven door was not
closed during broiling.
The rack has not been
properly positioned.
Action
See page 22.
See page 21.
See page 18.
See page 32.
Remove foil.
See pages 15
See page 24.
See page 24.
See the broiling guide on page
24.
English 49
2021-02-18 2021-02-18 3:21:06 3:21:06