Smart Control - Samsung NX60 67 S Serie Manual Del Usuario

Gas oven

Smart control

Before using Smart control feature, set Wi-Fi mode to on (See the Wi-Fi On/Off on
page 33).
How to connect the oven
1. Download and open the SmartThings app on your smart device.
2. Follow the app's on-screen instructions to connect your range.
3. Once the process is complete, the connected
displays and the app will confirm you are connected.
4. If the connection icon does not turn on, follow the instruction on the app to
reconnect.
To control the oven remotely
1. Press Smart Control appears in the display. The oven can now be controlled
remotely with a connected remote device.
2. Select the oven icon on the SmartThings app to open the Oven Control app.
When the app is connected to the oven, you can perform the following functions
through the application:
Oven remote control using the SmartThings app
Oven/ Cooktop Monitoring
Oven Remote Control
34 English
NX60A6715SS_AP_DG68-01376A-00_MES+EN.indb 34 NX60A6715SS_AP_DG68-01376A-00_MES+EN.indb 34
icon located on your range
• Check the status of the oven.
• Monitor the on/off status of each cooktop
burner.
• Set or adjust oven settings remotely.
Oven remote control using the SmartThings app
• Turn the oven off remotely.
My Cooking • Once cooking starts, change the set cooking
time and temperature remotely.
Error Check • Automatically recognize errors.
• Monitor the current temperature and reset the
Temp Probe
probe setting. (For some available models.)
• If is not shown in the display, you are still able to monitor the oven and
cooktop status and turn the oven off.
NOTE
• Opening the oven door or pressing Smart Control will delete
and prevent most of the remote functions from operating.
• When oven cooking is finished or cancelled,
• For safety reasons, you cannot turn on the gas oven remotely.
• For safety reasons, you must specify the cooking time to enable remote control.
• The oven continues operating even if the Wi-Fi connection is lost.
• Smart Control will not work properly if the Wi-Fi Connection is unstable.
• See the SmartThings app manual for detailed information.
from the display
is removed from the display.
2021-02-18 2021-02-18 3:21:02 3:21:02