Danby DBSH02213WD13 Manual Del Propietário página 11

OPERATING INSTRUCTIONS
TIMER
The timer feature can be used to set the heater to turn on or off after
a set amount of time.
To set the power on timer:
1. Ensure the heater is turned
off.
2. Press the timer button. The
LED display will change
to show hours instead of
temperature.
3. Press the timer button
repeatedly to set the number
of hours before the heater
should turn on. The timer
can be adjusted in 1 hour
increments to a maximum of
12 hours.
4. The LED will fl ash the selected
time for a few seconds and
then will return to showing
the temperature. The timer
indicator light will remain
illuminated while the timer
is active. The heater will
automatically turn on when
the timer reaches zero.
To set the power off timer:
1. Ensure the heater is turned
on.
2. Press the timer button. The
LED display will change
to show hours instead of
temperature.
3. Press the timer button
repeatedly to set the number
of hours that the heater
should run before turning off.
The timer can be adjusted
in 1 hour increments to a
maximum of 12 hours.
4. The LED will fl ash the selected
time for a few seconds and
then will return to showing
the temperature. The timer
indicator light will remain
illuminated while the timer
is active. The heater will
automatically turn off when
the timer reaches zero.
10