Weka FU15 D Manual Original página 15

COUNTER The operational time of the converter is logged in different ways:
- „OT total" shows the total amount of operational time since first start-up of the converter
- „OT today" show the operational time of the current day
- „OT user" can be reset by long pressing
keep track of the operational time within a certain time interval.
- „STC" show the elapsed time since the converter has been at a service station for inspection
last time.
Additional information about the Bluetooth update:
To perform an update a Bluetooth compatible smartphone or tablet running android 4.4.2 or higher is necessary.
Apple products are not supported at this moment.
A connection to the internet is necessary. The update consumes about 500kB of data traffic. Therefore make sure to
have enough data traffic available. The data connection speed should be at least EDGE or faster. WiFi connections
will also work.
The WEKA Service App can be downloaded from the Google Playstore (search term "WEKA Service App") or simply
use following QR-code or direct link to navigate directly to the Google Playstore:
https://play.google.com/store/apps/details?id=de.wekaelektrowerkzeuge.wekaserviceapp
When installing the WEKA Service App it is necessary to allow access to the location. Without permission the App
will not be able to communicate with the converter.
While establishing a connection depending on the operational system of the smartphone there might be a pairing
request. It is important to accept the pairing request otherwise no communication will be possible.
The internal serial number will not match the serial number of the type plate. If a search for available converters lists
more than one converter and the desired converter cannot be identified please take the converter to a place with no
other converters nearby and execute the update again. Also you can contact WEKA to request the internal serial
number that matches the serial number on the type plate.
Don't try working with the converter during an update process. This may interrupt the process and cause it to abort.
Stay as close as possible to the converter during the update process. This way you will gain maximum transfer speed
and signal strength. If you notice the transfer is stuttering or slowing down you might be too far away from the
converter or something is jamming the connection.
Downloading the update file to the converter will take approximately one minute. During this time period the process
can be aborted without any risk. Once the download is finished the converter will start installing the update. This
process will take about another minute.
Don't disconnect the converter from the mains supply during this time!
If the process gets interrupted by a mains voltage dropout the converter will try to install the update two more times.
If these tries fail the display will show "invalid firmware". In this case please contact WEKA, we can help you to restore
the converters firmware.
G U A R A N T E E
We provide 12 months warranty for the WEKA Frequency converter from the date of delivery. During this period we
will rectify material and production defects free of charge. This warranty does not cover normal wear, overloading,
non-compliance with the operating instructions and intervention by unauthorized persons or the use of parts from
other companies.
. This enables for example hire companies to
14