Use Of The Solar Panel; Powering The Microscope; Using The Led Torch Light - Optika Italy M-069 Manual De Instrucciones

10. Use of the solar panel

10.1 Powering the microscope

1. Connect the USB/micro-USB cable from the solar panel to
the microscope.
2. The blue LED will immediately turn on. (Fig. 3)
• This means that the solar battery is giving power to the mi-
croscope.
3. The battery charge level decreases when the microscope is
used. Blue LED will turn off as the charge level decreases.

10.2 Using the LED torch light

1. Press twice the switching button ①. (Fig. 4)
2. The LED torch light
3. Press the button
①
will turn on. (Fig. 5)
②
to turn off the torch light.
②
Page 8
F ig. 3 F ig. 3
①
F ig. 4 F ig. 4
F ig. 5 F ig. 5