Grandstream Networks GWN7800 Serie Guía De Instalación Rápida página 3

OVERVIEW
EN
The GWN7800 series are Layer 2+ managed network switches that allow small-to-medium enterprises to build scalable, se-
cure, high performance, and smart business networks that are fully manageable. It supports advanced VLAN for flexible and
sophisticated traffic segmentation, advanced QoS for automated detection & prioritization of latency sensitive voice/video traf-
fic, IGMP Snooping for network performance optimization, and comprehensive security capabilities against potential attacks.
The PoE models provide smart dynamic PoE output to power IP phones, IP cameras, Wi-Fi access points and other PoE
endpoints. The GWN7800 series can be managed in a number of ways, including the local network controller embedded in the
GWN7800 series switch, any GWN7000 series router with integrated local master, Grandstream's free on-premise network
management software (GWN Manager), as well as Grandstream's cloud network management platform (GWN.Cloud). The
GWN7800 series are best value enterprise-grade managed network switches for small-to-medium businesses.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperature outside range of 0 °C to 45 °C for operation and -10 °C to 60 °C for storage.
• Do not expose the GWN7800 to environments outside of the following humidity range: 10-90% RH (non-condensing) for
operation and 5-95% RH (non-condensing) forstorage.
• Do not power cycle your GWN7800 during system boot up or firmware upgrade. You may corrupt firmware images and
cause the unit to malfunction.
PACKAGE CONTENTS
GWN7800 Series Switch 1x 1.2m (10A)
1x Quick Installation Guide
2x Rack Mounting Kits
PORTS & LED Indicator
GWN7801/GWN7801P
1
2
8
No. Port & LED Description
1 Port 1-8 8x Ethernet RJ45 (10/100/1000Mbps), used for connecting terminals.
Note: GWN7801P Ethernet ports support PoE and PoE+.
2 1-8 Ethernet ports' LED indicators
3 Port SFP1/2 2x 1000Mbps SFP ports
4 SFP 1/2 SFP ports' LED indicators
5 CONSOLE 1x Console port, used for connecting managing PC
6 RESET Factory Reset pinhole. Press for 5 seconds to reset factory default settings
7 SYS System LED indicator
8 100-240VAC 50-60Hz Power socket
9 Lightning protection grounding post
1x 25cm Ground 4x Rubber
8x Screws (KM 3*6)
Cable Footpads
AC Cable
or
1x Console Cable (Optional)
1x Power Cord Anti-Trip (Optional)
5
3
6
7
4
9
~ 1 ~
GWN7802/GWN7802P
1
2
10
8 GWN7802P
No. Port & LED Description
1 Port 1-16 16x Ethernet RJ45 (10/100/1000Mbps), used for connecting terminals.
Note: GWN7802P Ethernet ports support PoE and PoE+.
2 1-16 Ethernet ports' LED indicators
3 Port SFP1/2/3/4 4x 1000Mbps SFP ports
4 SFP 1/2/3/4 SFP ports' LED indicators
5 RESET Factory Reset pinhole. Press for 5 seconds to reset factory default settings
6 SYS System LED indicator
7 CONSOLE 1x Console port, used for connecting managing PC
8 100-240VAC 50-60Hz Power socket
9 Lightning protection grounding post
10 Fan 1x Fan
GWN7803/GWN7803P
1
2
8
10
No Port & LED Description
.
1 Port 1-24 24x Ethernet RJ45 (10/100/1000Mbps), used for connecting terminals.
Note: GWN7803P Ethernet ports support PoE and PoE+.
2 1-24 Ethernet ports' LED indicators
3 Port SFP1/2/3/4 4x 1000Mbps SFP ports
4 SFP 1/2/3/4 SFP ports' LED indicators
5 RESET Factory Reset pinhole. Press for 5 seconds to reset factory default settings
6 SYS System LED indicator
7 CONSOLE 1x Console port, used for connecting managing PC
8 100-240VAC 50-60Hz Power socket
9 Lightning protection grounding post
10 Fan 2x Fans
6
5 7
3
4
9 9
8 GWN7802
6
5 7
3
4
9
GWN7803
9
8 GWN7803P
~ 2 ~