Grandstream Networks GWN7800 Serie Guía De Instalación Rápida página 5

Connect to Console Port
1. Connect the console cable to the DB9 male connector or USB port to the PC.
2. Connect the other end of the RJ45 end of the console cable to the console port of switch.
Notes:
• To connect, the steps order (1 -> 2) must be respected.
• To disconnect, the steps order is reversed (2 -> 1).
INSTALLATION
Install on the Desktop
1. Place the bottom of switch on a sufficiently
large and stable table.
2. Peel off the rubber protective paper of the
four footpads one by one, and stick them in
the corresponding circular grooves at the four
corners of the bottom of the case.
3. Flip the switch over and place it smoothly on
the table.
Install on the Wall
1. Use the matching screws (KM 3*6) to fix the
two L-shaped rack-mounting kits (rotated 90°)
on both sides of switch.
2. Stick the switch port up and horizontally on the
selected wall, mark the position of the screw
hole on the L-shaped rack-mounting kits with a
marker. Then, drill a hole at the marked position
with an impact drill, and drill the expansion
screws(prepared by yourself) into the drilled
hole in the wall.
3. Use a screwdriver to tighten the screws
(prepared by yourself) that have passed
through the L-shaped rack-mounting kits to
tighten the expansion solenoids to ensure that
the switch is firmly installed on the wall.
Install on a 19" Standard Rack
Note: GWN7802/GWN7802P/GWN7803/GWN7803P support rack mounting.
1. Check the grounding and stability of the rack.
2. Install the two L-shaped rack-mounting in the
accessories on both sides of switch, and fix
them with the screws provided (KM 3*6).
Rubber footpads
Circular groove
Back of the Switch
~ 5 ~
3. Place the switch in a proper position in the
rack and support it by the bracket.
4. Fix the L-shaped rack-mounting to the
guide grooves at both ends of the rack with
screws(prepared by yourself) to ensure that
the switch is stably and horizontally installed
on the rack.
ACCESS & CONFIGURE
Note: If no DHCP server is available, the GWN7800 default IP address is 192.168.0.254.
Method 1: Login using the Web UI
1. A PC uses a network cable to correctly connect any RJ45 port of the switch.
2. Set the Ethernet (or local connection) IP address of the PC to 192.168.0.x ("x" is any value between 1-253), and
the subnet mask to 255.255.255.0, so that it is in the same network segment with switch IP address. If DHCP is
used, this step could be skipped.
3. Type the switch's default management IP address http://<gwn7800_IP> in the browser, and enter username and
password to login. (The default administrator username is "admin" and the default random password can be found
at the sticker on the GWN7800 switch).
Method 2: Login using the Console port
1. Use the console cable to connect the console port of switch and the serial port of PC.
2. Open the terminal emulation program of PC (e.g. SecureCRT), enter the default username and password to login.
(The default administrator username is "admin" and the default random password can be found at the sticker on
the GWN7800 switch).
Method 3: Login Remotely using SSH/Telnet
1. Turn on the Telnet of the switch.
2. Enter "cmd" in PC/Start.
3. Enter telnet <gwn7800_IP> in the cmd window.
4. Enter the default username and password to login. (The default administrator username is "admin" and the default
random password can be found at the sticker on the GWN7800 switch).
Method 4: Configure using GWN.Cloud / GWN Manager
Type https://www.gwn.cloud (https://<gwn_manager_IP> for GWN Manager) in the browser, and enter the
account and password to login the cloud platform. If you don't have an account, please register first or ask the
administrator to assign one for you.
The GNU GPL license terms are incorporated into the device firmware and can be accessed via the Web user interface of the
device at my_device_ip/gpl_license. It can also be accessed here: https://www.grandstream.com/legal/open-source-software To
obtain a CD with GPL source code information please submit a written request to: info@grandstream.com
Refer to online documents and FAQ for more detailed information:
https://www.grandstream.com/our-products
~ 6 ~