Taking A Measurement - AND UC-356BLE Manual De Instrucciones

Taking a Measurement

Connecting the Scale
1.
On the top bar, navigate to "Scale" icon. Then, click "+ Measure" button at
the top right.
2. Wait for the scale to connect. This can take up to 1 minute.
3. Once the connection is made, the
on the top left of the scale display.
Add New Measurement in App
1. Place the scale on a flat, hard surface.
2. Now, step on the scale and remain still. At the end
of the measurement, the measurement value will be
displayed and the scale will beep once. Then the
final measurement value will start flashing.
3. Step off the scale and the measurement is
transferred to mobile app.
Note: If the icon does not appear, then no connection has been
made and the measurement will be stored in the scale.
icon will appear
E-8
Step On
Beep
Beep beep beep
Step Off
Ib