1.2 Technical Specifications S5/ S10-S
Model
Max Load
Max Speed
Gradeability
Max Range
40-55Km
Frame
Tyre size
Tyre type
Front & rear disk
Brake
brakes
Net weight
22.1kg
Size unfolded
Size folded
Voltage
Battery capacity
13 Ah
Motors
Power
600W
Charger input
voltage
Charger input
current
Double front & double rear suspension
Suspension
Display
Charging hours
6,5-7 h
EN
04
S5
S10-S
120Kg
25Km/h limited
20°
70-85Km
Aluminum alloy
10 in.
Air tyre
Front & rear
hydraulic brakes,
both brake handles
with oil pump
27.1kg
1245*610*1230mm
1150*610*525mm
48V
60V
18 Ah
1
2
2X 1000W
AC110-240 V
2A
with swingarm
Multicolor LCD display
10-12 h
Vibrations:
• The vibration value exposed to the hand-arm system is
2.5 m/s2.
• Measurement uncertainty 0.5 m/s2. The vibration can
be altered due to the rough terrain where the scooter is
circulated. However, this alteration will not depend on the
scooter.
Airborne noise:
• The A-weighted emission sound pressure level is 35 db
(A)
Command systems:
The electric scooter does not have the possibility of remote
control. It is not necessary to use any additional means to
prevent unauthorized use for safety measures because this
machine is not considered a dangerous industrial machine
but a vehicle for individual transport for public use.
From the driver's position, the driver can operate all the
drive components necessary for the operation of the
machine: brake, display with accelerator, handlebar, light
switch, bell.
The displacement of the electric scooter with driver on
board can only be implemented if the driver is at his
command post, is prepared and only if the speed of the
electric scooter is greater than 0 km/h, being started
mechanically by pushing the scooter forward and applying
the electric throttle only afterwards.
EN
05