Operational Instructions; First Assembling; Folding/Unfolding - Joyor S5 Manual De Usuario

too much, stop the charging process.
• Always only use the original charger that corresponds to
your scooter's model.
• Please keep all plastic bags of the packaging of the
product away from children to avoid suffocation.
Instructions regarding installation and assembly, aimed at
reducing noise and vibrations:
Before using the equipment, tighten all the fastening screws
of the screen with the accelerator and the brake lever,
making sure that these components are fixed and do not
move, to avoid vibrations.
To prevent the handlebar vibrations and shaking adjust and,
if necessary, loosen the screws inside the handlebar sleeves
when folded.
Before using the equipment, make sure that there are no
loose cables on the rear wheel and motor part, to avoid
high noise from the motor.
Every 2 months it is recommended to check and tighten the
nuts on the rear wheel of the motor, to avoid vibrations and
high noise from the motor.
EN
10
3

OPERATIONAL INSTRUCTIONS

3.1 First assembling

3.2 Folding/Unfolding

EN
11