Special Maintenance; Troubleshooting - Gastrodomus BERING05 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

-
Do not use abrasive cleaning agents. These can leave harmful residues. Use only mild soapy
water.
-
Ensure that no cleaning water penetrates into the electrical components.
-
Must not be cleaned by a water jet.
-
Always wipe dry after cleaning with soft cloth.
-
Take care when cleaning the rear of the appliance.
-
An agent or qualified technician must carry out repairs if required.
-
If the appliance is to be left inactive for long periods, unplug the power plug, empty the refrigerating
compartment and clean thoroughly.
VI. SPECIAL MAINTENANCE:
The instructions given in the following paragraph are for SKILLED PERSON.
Periodic Operations
-
Periodically clean the condenser using suitable tools (vacuum cleaner or soft brushes)
-
Check that the electrical connections are not loose.
-
Check that the thermostat and the sensor are in proper working order.
-
Recommend that an agent or qualified technician clean the condenser.
-
Replace the power cable with qualified technical personnel
VII. TROUBLESHOOTING:
If your appliance develops a fault, please check the following table.
Problem
The
appliance is
not working
Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Solution
Check the unit is plugged in
correctly and switched on
Call your agent or qualified
technician
Replace the fuse (GB)
Check the power supply to ensure it
conforms to the nameplate on the
back of the product
Call your agent or qualified
technician
20

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bering10Bering14Bering03

Tabla de contenido