AMATECH Easy Lock Blade Clamp F-40040 Instrucciones De Uso página 5

Instructions for Use
1. Contact Details
For ordering information please see catalog.
customer service Information: For complains or ordering information, please
contact your supplier and refer to the catalog. All modifications, upgrades, or
repairs must be performed by an authorized specialist
2. General Safety Warnings and Cautions:
WARNING:
a. Do not use if product shows visible damage.
b. Prior to using this device, please read the instructions for equipment set up and
use. Familiarize yourself with the product before application on a patient.
c. To prevent patient and/or user injury and/or equipment damage, examine the
device and surgical-table side rails for potential damage or wear prior to use. Do
not use the device if damage is visible, if parts are missing or if it does not function
as expected. To prevent patient and/or user injury and/or equipment damage,
verify the device attaching clamps completely touch the table-side rails and are
firmly in place. Test the locking mechanism to ensure no movement when
elevated or pushed.
d. Prior to using this or any other type of medical apparatus with a patient, it is
recommended that you read the Instructions for Use and familiarize yourself with
the product.
e. To prevent patient and/or user injury and/or equipment damage, verify that the
clamp is firmly in place and its jaws are completely engaged around the surgical-
table side rails. Install the clamp only on standard side rails for which it was
designed. Once secured, test the locking mechanism to ensure no movement
when elevated or pushed.
CAUTION:
a. Do not exceed the device safe working load.
b. Clamp must be tightened prior to use.
c. Do not span table joint with the clamp.
d. To prevent patient and/or injury and/or equipment
damage, all modifications, upgrades or repairs
must be performed by an authorized specialist.
Failure to comply may void warranty.
©2019 Allen Medical Systems, Inc. All Rights Reserved
Document Number: 80028540
Version: A
Ref Blank Template: 80026387 Ver. B
Issue Date: 20 MAY 2020
Page 5