Outer
Ground
Wire (L1)
Strap
Center
Wire
CLEAN AND MAINTENANCE:
To clean and give proper maintenance for oven, always turn off the isolator switch at
the cooker point, and allow oven to cool.
After every meat roasting clean the oven panels as soon as they have cooled so that
any fat splashes are removed.
After use wipe over the rest of the oven with a soft cloth wrung out in liquid detergent.
Do not use abrasive scourers or steel wool on any stainless steel, glass or painted
surfaces.
Always wait until the oven is cool before cleaning- this is particularly important when
the glass oven door is concerned.
When cleaning oven cavity, put up the bottom element slightly to prevent damage.
Do not splash water into the electrical parts when cleaning. If careless, wait until it has
been cooled before using.
3-WIRE HOOK-UP
ALL SCREW CONNECTIONS MUST BE
TIGHT IMPROPER INSTALLATION MAY
VOID WARRANTY
Outer
Wire (L2)
English-8