FONESTAR AMPLY-T Manual De Usuario página 3

15.- IR: infrared receiver for the remote control.
16.- MicroSD memory card connection port.
17.- INPUT: auxiliary input with 2 connection options, 2 x RCA connectors or 3.5 mm jack. The 3.5 mm
jack has priority over the 2 x RCA jack, which means that inserting the 3.5 mm jack into the amplifier
will play only what you have connected to this port and ignore any signal received at the 2 x RCA jack,
regardless of whether there is an audio signal on the first or not.
18.- Equipment on/off button.
19.- Charging indicator lights. During the charging process this LED may have up to 3 colours indicating the
charge level:
+ RED: charging.
+ YELLOW: medium charge level.
+ 'GREEN: full charge.
20.- Input for supplied power adapter.
HAND-HELD MICROPHONE (AMPLY-T)
9
10
11
12
13
14
15
16
1.- 3-position operation selector: Off, Standby and On.
17
2.- Operation indicator light. The indicator will be green indicating correct operation. When the microphone
is turned on and the indicator lights up red, the batteries need to be replaced.
18
3.- Microphone gain selector.
19
4.- Microphone input, 3.5 mm jack.
20
5.- Battery holder.
BELT-PACK MICROPHONE (AMPLY-TP)
1.- Operation indicator light.
5
2.- 3-position operation selector: Off, Standby and On.
3.- Battery holder.
8
MASTER
7
TREBLE
6
BASS
1
5
4
3
2
ECHO
1
MIC VOL
2 3 4
4 5 6
ON
1
Mode
OFF
3
2
EQ VOL- VOL+
1 0
RPT U/SD
1 2 3
4 5 6
7 8 9
MODE
AMPLY-T
/ VOL -
PORTABLE AMPLIFIER
100 W
UHF 525.85 MHz
/ SCAN
/ VOL +
EQ
2 3
IR
INPUT
MIC
PRIORITY
R L
MIC
9 V DC, 1.5 A
7
8
9
10
- 3 -
9
10
11
12
13
14
15
16
17
18
19
20
5
EN
4
3
2
EQ
1 0
1
4
7