Sauder Barrister Lane 416798 Instrucciones De Montaje página 15

Step Step 10
Carefully turn your unit over onto its front edges. Unfold the
å
BACK (G) and lay it over your unit.
Make equal margins along all four edges of the BACK (G). Push
å
on opposite corners of your unit if needed to make it "square".
Fasten the BACK (G) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over the
å
UPRIGHTS (C and D).
NOTE: Perforations have been provided for access through the
å
BACK. Carefully cut out the holes needed.
Push the FEET (23E) into the holes in the BOTTOM (F).
å
These perforations should
be closer to this edge.
23E
www.sauder.com/services
G
F
23E
416798
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
(48 used in this step)
These holes must line up over
the UPRIGHTS (C and D).
1N
NAIL
Page 15