General Features - Elkron AS02/S Manual Del Usuario

General Features

UNITS AS02/S - AS07/S - AS15
Rated voltage ............................................. 230V~ +10  -15% , 50Hz
Max. electrical input at Vnom with PS515 .. 250 mA (Vers. AS02/S – AS07/S)
Max. elec. input at Vnom - PS34 (M.LRS-50-15)......500 mA (Vers. AS15)
Rated output voltage for supply unit ........... 13.8V–
Max.current output PS515 .......................... 1.5A (Vers. AS02/S – AS07/S)
Max.current output PS34 (MW.LRS-50-15) . 3.4A (Vers. AS15)
Ripple max for PS515 ................................. 300 mV p.p. con I = 1.5A (Vers. AS02/S – AS07/S)
Ripple max for PS34 (MW. LRS-50-15).......120 mV p.p con I = 3.4A (Vers. AS15)
Current available for ext. device ................. 62mA (Vers.AS02/S for 24h autonomy with batt. 12V 2.1Ah + PC21)
PC21 board input (a 12V-)
Housing for battery Version AS02/S ........... 12V– 2.1Ah max. (plastic case)
Housing for battery Version AS07/S ........... 12V– 7 Ah max. (plastic case)
Housing for battery Version AS15 ............... 12V– 17 Ah max. (metal case)
Tamperproof ................................................ 1A - 24V– for all versions
Operating temp. guaranteed by the manufacturer .. - 10°C  +55°C
Max current electrical output PC21 board ..... 2 mA (for LED G, BL, L command)
Low battery detection limit .......................... 11.2V 11.4V ±5% hysteresis @ 600 mV
Minimum case protection level .................... IP30 IK04
Dimensions (w x h x d) in mm .................... 245 x 185 x 70 (Version AS02/S)
FIELDS OF APPLICATION
The scope of AS02/S, AS07/S, AS15 power supply extension units is to offer physical housing for the following
products:
- input expansion board EP100 / ES100 for MP110 - MP120 systems.
- input expansion board EP200 4Z / EP200 8Z for MP200 system.
- interface module for IV4Z fast signals to inertial and rolling shutter movement detectors.
The following items are installed inside each power supply extension unit:
• 2 different power supply models (depending on the version):
PS515 flyback (Version AS02/S - AS07/S)
Rated voltage: 230V~ 50Hz
Declared operating voltage: from 100 to 260V~ 50/60Hz
Maximum current output from PS515: 1.5A
PS34 switching (Version AS15)
Rated voltage: 230V~ 50Hz
Declared operating voltage: from 85 to 264V~ 50/60Hz
Maximum current output from PS34: 3.4A
(((ELKRON)))
225mA (Vers. AS07/S for 24h autonomy with batt. 12V 7Ah + PC21)
558mA (Vers.AS15 for 24h autonomy with batt. 12V 17Ah + PC21)
8 mA approx
247 x 345 x 80 (Version AS07/S)
435 x 320 x 93 (Version AS15)
10