Depstech DS300 Manual Del Usuario página 8

Ocultar thumbs Ver también para DS300:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Q1: The image quality wasn't that good as advertised?
A1: Please adjust the length between the camera and the object that
you're observing into the focal range. The focal range should be
1.18"~3.15" for single camera version, and 1.18"~3.15"/0.79"~2.36"
in for dual camera version. Besides, it's essential to adjust the
brightness of your endoscope for the best image quality. It will do a
great help if you wipe the lens of the camera regularly after used.
Q2: The endoscope was failing to turn on?
A2: It might due to low battery status, especially in cold area. To release
the low battery state you've to fully charge the endoscope. You can
charge the endoscope for 4~5 H and try to turn it on again.
Q3: The endoscope can not take a picture or record a video?
A3: First please make sure that the TF card has been inserted into the
machine or not. Then make sure that you've formatted the TF card
at the first use.
You can follow the steps below:
1. Short press menu
2. Short press "
3. Find and choose "Formate", then choose "OK".
FAQ
" button to remove the cursor down
06

Publicidad

Tabla de contenido
loading

Tabla de contenido