YAT YT5452 Instrucciones De Montaje, Utilización Y Mantenimiento página 44

through the feed intake opening.
i) If the machine becomes clogged,
shut-off the power source and
disconnect the machine from
supply before cleaning debris.
j) Never operate the machine with
defective guards or shields, or
without safety devices.
k) Keep the power source clean of
debris and other accumulations
to prevent damage to the power
source or possible fire.
l) Do not transport this machine
while the power source is running.
m) Stop the machine, and remove
plug from the socket. Make sure
that all moving parts have come to
a complete stop
- whenever you leave the machine,
- before clearing blockages or
unclogging chute,
- before checking, cleaning or
working on the machine.
n) Do not tilt the machine while the
power source is running.
Maintenance and storage
a) When the machine is stopped for
servicing, inspection, or storage,
or to change an accessory, shut
off the power source, disconnect
the machine from the supply and
make sure that all moving parts
SAFETY INSTRUCTIONS
43
are come to a complete stop. Allow
the machine to cool before making
any inspections, adjustments, etc.
Maintain the machine with care
and keep it clean.
b) Store the machine in a dry place
out of the reach of children.
c) Always allow the machine to cool
before storing.
d) When servicing the shredding
means be aware that, even though
the power source is switched off
due to the interlock feature of the
guard, the shredding means can
still be moved.
e) Replace worn or damaged
parts for safety. Use only
genuine replacement parts and
accessorises.
f) Never attempt to override the
interlocked feature of the guard.
Additional safety instructions for
units with bagging attachments
Switch-off the machine before
attaching or removing the bag.
Recommendation
The machine should be supplied via
a residual current device (RCD) with
a tripping current of not more than
30 mA.
Service
EN