Getting Started; Select The Display Language And Cancel The Demonstration; Set The Clock And Date - Kenmore KDC-X305 Manual De Instrucciones

Basics
To On the faceplate
Turn on the power Press B SRC.
• Press and hold to turn off the power.
Adjust the volume Turn the volume knob.
• Press B SRC repeatedly.
Select a source
• Press B SRC, then turn the volume knob
within 2 seconds.
Change the display Press DISP repeatedly. (Page 32)
information
4
ENGLISH

Getting Started

1

Select the display language and cancel the demonstration

When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES], see page 5), the display shows: "SEL LANGUAGE" "PRESS"
"VOLUME KNOB"
1
Turn the volume knob to select [ENG] (English) / [SPA] (Spanish) /
[FRE] (French), then press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB".
2
Press the volume knob again.
[YES] is selected for the initial setup.
3 Press the volume knob again.
"DEMO OFF" appears.
2

Set the clock and date

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Set the time in the order of "Hour" "Minute".
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.