Scott Living HDSLFP48L-2A Instrucciones De Montaje página 19

Assembly (continued)
29
Inserting the glass
□
Slide the glass (I) into the inner U-channels on both upright arms (B and C) until the glass sits onto the heater (A). If
needed, push top of upright arms in or out to accommodate glass. Make sure the top of the glass (I) is flush with
the top of both upright arms (B and C).
The warning labels on glass
should face outward.
30
Positioning connector strap
□
Position top connector strap (D) over the glass (I) and upright arms (B and C). Follow orientation shown below.
C
D
I
C
I
B
A
B
H
I
The bevel edge faces inside the unit.
D
H