REVAMP Professional PROGLOSS 3950 Manual De Instrucciones E Información Sobre La Garantia página 3

• This appliance is equipped with an automatic thermal limiter, which will cycle
off when overheated and come back on when cooled down. If the unit cycles off,
unplug the cord for several minutes before restarting.
• This appliance features a polarized plug with one blade wider than the other. As a
safety feature, this plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
ALCI Safety Device
This hair dryer is provided with an appliance leakage circuit interrupter (ALCI) safety
device built into the plug. This device is designed to make the unit inoperable under some
abnormal conditions, such as accidental immersion in water. The ALCI safety device is
equipped with a test button so that its operation can be checked. This unit should be
tested before each use to confirm that the safety device is operational.
To test:
After plugging in your hair dryer:
1. Press the reset button on the ALCI device.
2. Press the test button. The reset button will pop out. This verifies that the safety
device is operating properly.
3. Press the reset button to reactivate your ALCI safety device.
4. Your hair dryer is now ready for use.
This unit may automatically trip when unplugged. If so, the unit must be reset after it is
plugged in. If the dryer doesn't reset after following the above testing procedure, contact
the manufacturer.
Should the ALCI safety device trip (i.e., reset button pops out) during use, press the reset
button. Should the hair dryer fail to reset, contact the manufacturer. Never operate this
appliance if it has been dropped in water.