Cleaning & Maintenance; Cleaning The Filter - REVAMP Professional PROGLOSS 3950 Manual De Instrucciones E Información Sobre La Garantia

Ocultar thumbs Ver también para PROGLOSS 3950:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTRUCTIONS FOR USE
• Wash your hair as normal and squeeze out excess moisture with a towel and comb
through to detangle.
• Apply heat protection spray before drying, if desired.
• Plug the product into a 120V AC electrical outlet.
• To quickly blast dry hair, use without a nozzle. For precision drying, use the styling
or smoothing concentrator nozzles.
• To use the dryer without the concentrator nozzles, simply press the speed switch
on the handle to turn on the product (5).
• Adjust the heat and speed switches on the handle to the desired setting (higher
heat and speed settings for drying and lower heat and speed settings for styling):
SPEED
Off
Medium speed
High speed
• To use the Cold Shot, press and hold the button at the front of the hair dryer
handle. This will cool the hair and help to set the style.
• After use, switch off the dryer by switching the speed setting to 0FF, unplug and
allow to cool before storing away.
Follow us on (US) https://us.revamphair.com/ and (CAN)
www.revamphair.ca for the latest hair tips and advice.
CLEANING & MAINTENANCE
• If you just use the appliance, switch it off, unplug and allow to cool fully before
cleaning.
• Wipe over all surfaces using a soft damp cloth. Do not use harsh abrasives or
cleaners.
• Do not immerse the appliance in water and/or other liquid.
• Ensure all parts are dried thoroughly with a soft towel before reusing.
• To prevent cord damage, do not wrap the cord around the appliance, always store
the cord loosely next to the appliance.
• Store in a cool, dry place.

Cleaning the Filter

To maintain peak product performance and to prolong motor life, it is important to
regularly remove dust and dirt from the rear grille and clean.
• To remove - Turn the rear grille counterclockwise and pull off.
• To clean - Clean with a soft brush and replace.
• To replace - Align the grille guides with the slots in the casing (on the dryer) and
turn clockwise.
DO NOT USE APPLIANCE WITHOUT THE REAR GRILLE FILTER IN PLACE
STORAGE
When not in use, unplug the unit. Allow it to cool, and store out of reach of children in a
dry location. Never wrap the cord around the appliance, as this will cause the cord to wear
prematurely and break. Handle cord carefully, and avoid jerking, twisting, or straining it,
especially at plug connections.
HEAT
Low heat
Medium heat
High heat (for faster drying)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dr-3950

Tabla de contenido