Loading The Product; Use Of Cabinet; Electronic Control - Bonnet Neve MULTIFRESCO PLUS Serie Instrucciones De Uso Para El Usuario

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
9.7

Loading the product

IT
Energise the cabinet to start its cooling cycle,
FR
by acting on the general disconnector switch
mounted on the wall. After about 2 hours it is
possible to load the cabinet.
EN EN
The cabinet is suitable to maintain the
temperature of the goods and not lower it; the
DE
foods, therefore, must be introduced inside it
only if already cooled to the respective
ES
temperatures of preservation. Products which
have been heated must never be introduced
into the cabinet.
PT
In the presence of glass fronts on the cabinet, it
is recommended to load the goods when there
is no customer in the sales area.
In loading the goods, ensure that:
• The load is homogeneous in terms of
dimension and quality of the products
• The goods do not obstruct the correct flow
of refrigerated air ("Fig. 14")
• The goods do not exceed the load line
Uniformly distributed maximum permissible
load:
• On the bottom level: 150 kg/m
• On the shelves: 150 kg/m
F MAXIMUM ANGLE OF DOOR OPENING:
100°. For correct working of the torsion
bar and to avoid any break of the door
or of the hinge do not exceed the
maximum angle of door opening i.e.
100° ("Fig. 20").
N°DOC. UM000652 REV. A - 21/11/22
MULTIFRESCO PLUS
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
9.8
B
Lighting
Cabinet lighting is controlled by a switch located
on the electronic control unit ("Fig. 21" ).

Electronic control

TEMPERATURE SETTING AND CONTROLS
Only if the average internal temperature is too
cold or not cold you can increment or decrement
the temperature:
Press the (3) (2 sec.) key in order to see on
display the temperature set point.
Press the (4) key or the (5) key in order to
increment or decrement the temperature set
point.
Press the (3) key in order to store the new
temperature set point.
2
2

Use of cabinet

For correct operation, we recommend
verifying that the doors are not open.
18/22