Technical Data - YATO YG-04680 Manual De Instrucciones

the heating plate should be heat up to at least 180
evaporating may cause smoke generation which is normal phenomenon. Therefore evaporating should be carried out at location
with eff ective ventilation. Do not inhale vapours of conservatives.
After evaporation is completed and smoke stops, disconnect the product from power supply and clean the plate using cleaning
agent. Only then the heating plate may be used for food preparation.
Heating plate and other parts of the product should be cleaned by means of a cloth soaked with waster solution of mild detergent
for washing dishes. Residues of solution to be removed using a cloth soaked with water. After cleaning of product wipe it dry. The
plate should be cleaned after each use, waiting before until it cools down completely. Clean all food residues which remained on
the plate, this will prevent any burning while it is reused, and also will prevent any decrease of product effi ciency.
Do not use any solvents, corrosive agents, alcohol, gasoline or abrasive agents for cleaning.
Vents should be cleaned using a vacuum cleaner.
Note! Never immerse the product in water or other liquid.
Product storage
If the product is not used for prolonged time, disconnect it from power supply.
Product when stored should be kept indoors, protect it from dust, dirt and moisture. It is recommended to store the product in its
original packaging.
Store the product in its working position. Do not store products in layers. Do not put anything on the product. during storage.

TECHNICAL DATA

Parameter
Catalogue number
Rated voltage
Rated frequency
Rated power
Insulation class
Heating plate diameter
Operating temperature
Net weight
O R I G I N A L
GB
C to let it evaporate any residues of conservatives. The preservative while
O
Measuring unit
[V~]
[Hz]
[kW]
[mm]
[ O C]
[kg]
I N S T R U C T I O N S
Value
YG-04680
220-240
50 - 60
3
I
Ф320
50 ~ 300
14
9