CRAFT+MAIN LAGOON LGRLSC Manual De Instrucciones página 7

INSTALLATION PROCEDURE / STEP 4
1. Install rail wall bracket(1) on top raiI(13).
2. Install anti-jumper(12) on top raiI(13).
3-4. Level top rail(13), than mark the line for rail wall bracket(1) on both sides.
5-6. Use allen key to loose the cap onto the top raiI(13), then remove the top rail from wall track.
7. Draw drilling hole position of rail wall bracket(1).
8. Drill hole with ¼" drill bit.
LEFT HAND ASSEMBLY
RIGHT HAND ASSEMBLY
1/4"
(6mm)
- 6 -
1/4"
(6mm)