Product Description And Specifications; Intended Use; Product Features - Bosch Professional GWS 18V-10 P Manual Original

10 | English
Additional safety information
Wear safety goggles.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
Do not touch grinding and cutting discs until they have
u
cooled down. The discs can become very hot while work-
ing.
Release the On/Off switch and set it to the Off posi-
u
tion when the power supply is interrupted, e.g. when
the battery pack is removed. This prevents uncontrolled
restarting.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery in the manufacturer's products.
u
This is the only way in which you can protect the battery
against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for cutting and brushing metal,
stone, plastic and composite materials, roughing metal,
plastic and composite materials as well as making holes in
stone materials using diamond annular cutters, without the
1 609 92A 7ZT | (26.09.2022)
use of water. Make sure that the correct protective guard is
used (see "Operation", page 15).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
(3) Spindle lock button
a)
(4) Rechargeable battery
(5) Rechargeable battery release button
(6) On/off switch
(7) Unlocking lever for on/off switch
(8) Standard auxiliary handle (insulated gripping sur-
a)
face)
(9) Vibration-damping auxiliary handle (insulated grip-
ping surface)
(10) Extraction guard for grinding
(11) Protective guard for grinding
(12) Protective guard for cutting
(13) Mounting flange
a)
(14) Carbide grinding head
a)
(15) Grinding disc
a)
(16) Disc brush (M 14)
a)
(17) Cutting disc
a)
(18) Diamond cutting disc
(19) Clamping nut (M 10)
(20) Quick-clamping nut with bar (M 14)
(21) Handle (insulated gripping surface)
(22) Grinding spindle
a)
(23) Hand guard
a)
(24) Rubber sanding pad
a)
(25) Abrasive disc
a)
(26) Round nut
(27) Two-pin spanner for clamping nut/round nut
a)
(28) Cup brush
a)
(29) Conical brush
a)
(30) Diamond annular cutter
a)
(31) Open-ended spanner
(32) Extraction guard for cutting with cutting guides
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
a)
a)
a)
a)
a)
Bosch Power Tools