Wall Mounted Installation - VENTE-UNIQUE BEF-40WMC Manual De Usuario

Chimenea eléctrica de panel curvado
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MINIMUM MANTEL CLEARANCES
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE

Wall Mounted Installation

Due to the many different materials used on different walls, it is highly recommended that you consult your local
builder before you install this appliance on the wall.
A.
Select a location that is not prone to moisture and is located at least 36" (914mm) away from combustible
materials such as curtain drapes, furniture, bedding, paper, etc.
B.
Have two people hold the appliance against the wall to determine the final location.
C. Place unit face down on a soft, non abrasive surface. Remove the bracket from the back of the unit by removing
the screws, refer to Figure 1.
D.
Mark out location, then mount the bracket (s) onto the wall using the supplied screws. This bracket MUST have
the
hooks
facing upward and be level.
WARNING
HEAT RESISTANT TO PREVENT DISCOLOURATION.
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Flamatech nevado

Tabla de contenido