Electric Safety - Senix SDE15-L Manual Del Operador

3. Do not put your hands into the
hopper opening while the unit is
running. Use the paddle to push
objects into the hopper.
4. Avoid Unintentional Starting - Do
not carry plugged-in appliance
with finger on switch. Be sure
switch is off when plugging in.
5. Before Starting the Chipper/
Shredder, make sure that the
hopper inlet is empty.
6. Before feeding material into the
shredder, remove any metal,
rocks, bottles, cans or other
foreign objects that may damage
blades.
7. Keep guards in place and in
working order.
8. Keep blades sharp.
9. Keep clear of intake and
discharge chute. Use included
push stick. Unplug unit and allow
it to stop before unclogging.
10. Disconnect Appliance -
Disconnect the appliance from
the power supply when not in
use, before servicing, when
changing accessories such as
blades, and the like.
11. Maintain Appliance With Care
- Keep cutting edge sharp and
clean for best performance
and to reduce the risk of injury.
Follow instructions in this
WWW.SENIXTOOLS.COM
manual. Inspect appliance cord
periodically, and if damaged,
have it repaired by an authorized
service facility. Inspect extension
cords periodically and replace
if damaged. Keep handles dry,
clean, and free from oil and
grease.
12. Check Damaged Parts - Before
further use of the appliance,
a guard or other part that is
damaged should be carefully
checked to determine that
it will operate properly and
perform its intended function.
Check for alignment of moving
parts, binding of moving parts,
breakage of parts, mounting,
and any other condition that
may affect its operation. A guard
or other part that is damaged
should be properly repaired
or replaced by a qualified
technician unless indicated
elsewhere in this manual.

ELECTRIC SAFETY

1. Ground Fault Circuit Interrupter
(GFCI) protection should be
provided on the circuit(s)
or outlet(s) to be used for
the gardening appliance.
Receptacles are available
having built-in GFCI protection
7 - EN