Technical Data; General Safety Warnings For The Use Of Grinding Machines Accessories - Truper SOP-E45 Manual

Technical data

For grinders of
Maximum cutting depth
Maximum press opening
Angled cuts
General safety warnings for the use
of grinding machines accessories
Keep your work area clean, tidy and well illuminated.
CAUTION
Untidy and dark areas cause accidents.
Keep children and others at a safe distance while
operating the tool.
WARNING
Distractions can cause you to lose control and lead to
accidents.
Always be alert, use caution and common sense.
CAUTION
Do not let familiarity with the tool distract you while
operating it.
Do not use the tool if you are tired, or under the
influence of drugs, alcohol or medication.
DANGER
A moment of inattention while operating the tool may
result in serious personal injury.
Use the tool with all parts in place and in good
condition.
WARNING
Failure to do so may result in serious personal injury.
Properly secure and support the workpiece.
CAUTION
Use clamps and a stable work surface.
Never force the tool.
CAUTION
Working within the range for which it was designed
ensures better and safer working.
Store the tool in a safe place out of the reach of
children.
WARNING
Tools are dangerous in inexperienced hands.
Wear the right clothes.
Loose clothing or long hair can be caught in the mobile
WARNING
parts.
Code
Description
SOP-E45
102273
Angle grinder stand
4 1/2"
3/4"
3"
0° - 45° left
Keep hands away from rotating and/or moving parts.
WARNING
Failure to do so may result in serious personal injury such
as cuts, burns or crushing.
Use appropriate personal protective equipment.
CAUTION
Wear eye protection. Dust mask, non-skid shoes, hard
hat and hearing protection.
Do not overreach.
CAUTION
Good footing and balance allow better control of the tool in
unexpected situations.
Properly secure the accessory to the tool.
CAUTION
Do not use accessories without first making sure they are
properly attached and secured. Otherwise, they may be
thrown at the operator.
Remove any adjusting key before operating the tool.
WARNING Additional tools or wrenches placed on a rotating part of
the tool may cause serious personal injury.
Maintain the tool and make sure that it is in proper
condition before using it.
CAUTION
Carefully check its moving parts, alignment and
mounting. Do this periodically. Look for any damaged
or malfunctioning parts for immediate repair at a
Accessories.
CAUTION
Use only the accessories or spare parts indicated in these
instructions or certified by
Authorized Service Center.
.
ENGLISH
3