Maintenance; Filter Cleaning - Truper MAX-20A Manual

Maintenance

Cleaning
• Remove the battery before any cleaning operation.
• Clean the vacuum cleaner with a damp cloth impregna-
ted with a few drops of detergent and dry it afterwards.
• Do not use solvents, products containing chlorine or
abrasive products to clean the appliance.
• Do not immerse the vacuum cleaner in water or any
other liquid, nor put it under the tap.
Emptying of dust compartment
• Empty the dust compartment (C) when residues are
visible through its transparent walls, when it is full or when
the unit is not operating at full power.
• Press the compartment opening button (D) and turn the
compartment downwards to release it.
• Remove the dust compartment cover (E).
• Place the debris in a suitable container.
• Remove any remaining debris from the filters, the lid and
the inside of the compartment.
• To assemble the compartment, follow the above steps in
reverse order.

Filter cleaning

• Remove the dust compartment cover (E).
• Disassemble the filter components.
• Hand wash the filters with a mild detergent or
dishwashing soap. Make sure that the fabric filter is
thoroughly dry before replacing it.
• To assemble the filter components, follow the instructions
on page 7.
E
D
C
ENGLISH
9