Blue Sky Outdoor Living PFP2216 Manual Del Propietário página 6

ASSEMBLY
NO TOOLS REQUIRED!
STEP 1
Make sure the fire pit is a safe distance from all combustible materials. If
using directly on the ground, level the area with a rake if necessary and
remove any dry grass or overhanging branches that could create a fire hazard.
STEP 2
CAUTION: To avoid injury when lifting the fire pit,
two or more people are required.
Insert the ash catch into the bottom of the fire
chamber and then put the grate on top of the ash
catch, positioning the grate so the cut outs on two
edges are placed over the handles of the ash catch.
STEP 3
Stack firewood in fire pit and light the fire.
When finished with your fire, just let the flames burn out. If you dowse the fire
with water to end the burn prematurely, you may damage your fire pit. Make
sure the pit has completely cooled before handling.
Note: There are drain holes in the bottom of the ash catch to disperse rainwater.
There could be ash and particulates in the ash catch which could be carried out with
the water onto your deck or patio.
6 | www.bluesk youtdoorliving.com